Product Technical Spec.
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
1.3120 inches
Pilot Diameter:
0.5000 inches
Overall Length:
2.4440 inches
Flange Diameter:
1.4370 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
1.3120 inches
Undercut Width:
0.0780 inches
Shaft Diameter:
0.1200 inches both shafts
Shaft Length:
0.3750 inches rear shaft
Shaft Length:
0.4380 inches front shaft
Schematic Diagram Designator:
1 y-rotor, 1 y-stator
Fragility Factor:
Moderately rugged
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
130.0 milliamperes
Stator Input Electrical Power Rating:
320.0 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
15.00
Zso Resistance In Ohms:
14.00
Zrs Resistance In Ohms:
16.00
Rotor Dc Resistance In Ohms:
14.00
Stator Dc Resistance In Ohms:
10.80
Phase Shift Angle In Deg:
6.000 output to input
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Electrical Error Angular Range In Minutes:
-20.0/+20.0
Actuator Friction Torque At Minus 55 Deg Celsius:
15.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
5.0 centimeter-grams
Alignment Hole Quantity:
4
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0010 inches
Shaft End Play:
0.0010 inches
Pilot Length:
0.0400 inches
Shoulder Length:
0.1320 inches
Mounting Surface To Terminal End Distance:
1.6310 inches
Shaft Maximum Runout:
0.0010 inches
Plus J Zro Reactance In Ohms:
63.00
Shaft Slot Depth:
0.0310 inches both shafts
Plus J Zso Reactance In Ohms:
77.00
Shaft Slot Width:
0.0310 inches both shafts
Plus J Zrs Reactance In Ohms:
8.00
Shaft Type:
Round, slotted both shafts
Alignment Hole Depth:
0.1250 inches
Alignment Hole Bolt Circle Diameter:
0.8750 inches
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
4.0 ounces
Terminal Type And Quantity:
6 wire lead
Item Name:
Synchro,differential Receiver
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
